+7 (86554) 9-54-88

Mon - Fri: 08:00 - 17:00

Russia, Nevinnomyssk

Kombinatskaya str., 6, building G

Alumar LLC is the largest manufacturer of aluminum slugs in Russia

We carry out a full production cycle

Leave a request and our manager will prepare for you unique
offer during the working day

OUR SLUGS

No matter what your production tasks are, our engineers are ready to work with your technical team to provide aluminum semi-products fully optimized for your manufacturing process.

TUBE SLUGS

Suitable for the production of tubes for pharmaceutical, perfume, cosmetic, and household products

TUBE SLUGS

Diameter: 24.7; 27.7; 34.75 mm.
Thickness: from 3.6 to 7.5 mm.
more detailed

AEROSOL SLUGS

Alumar LLC is the largest manufacturer of aerosol slugs in Russia

AEROSOL SLUGS

Diameter 34.75; 44.75; 49.75; 52.75.
Thickness: from 3.6 to 7.5 mm.
more detailed

PRODUCTION STAGES

1

MELTING

Melting is performed from the primary metal, in a modern melting furnace of Sistem Teknik, Turkey, which allows to reduce the carbon footprint to the extent possible products

2

CASTING AND ROLLING PRODUCTION

Rolling is performed on modern equipment of Sistem Teknik, Turkey, which provides high accuracy of the preset parameters.

3

COLD STAMPING PRODUCTION

It is performed on modern press of the Swiss company Bruderer and unwinding machines of the Italian company Sarroni.

4

Surface Treatment

At this stage either tumbling or shot-blasting treatment is performed, depending on the task.

5

Quality Control

Product quality control is carried out in the metallurgical laboratory with the following equipment: Microscope ZEISS Axio Vert.A1, Spectrometer Spectromaxx, Laboratory Hydrogen Analyzer Hycal, Laboratory furnace for aluminum heat treatment of the company KG, Laboratory melting furnace of the company TLP, Laboratory semi-automated polishing machine FTP-1AX, Laboratory polishing machine FTP-1MX, Laboratory cutting-off machine Future Tech FTC-D150A, hardness measuring instrument Time TH-600.

The manufacturing process of slugs is based on strict monitoring of critical parameters in the course of production of semi-products and complies with the standard ISO 9001:2015.

Partners and clients of the company

Years of experience and trust

Alumar LLC

Was found in 2010 as a common project of Arnest LLC and a Greek company Aluman. In 2013 production was started and in 2015 it reached its design capacity of 6,000 tons of slugs per year.

In 2017 Alumar LLC became an independent enterprise and from that time forth preparations for reconstruction began in order to increase output of production.

In 2020 a new annealing furnace from Sistem Teknik, Turkey, was put into operation to reduce carbon dioxide emissions.

In 2021 the casting and rolling unit and the press and metal-forming equipment were replaced, which allowed to increase production up to 11 thousand tons per year.

We produce more than 1000 tons of aluminum slugs per month

Leave a request and our manager will prepare a unique offer for you during the working day

«Alumar» welcomes guests

The end of November and the beginning of December turned out to be very busy for OOO «Alumar» in terms of visits by various delegations.

Get a commercial offer

Fill in the data and our manager will send you an individual offer during the working day